Wagner Wagner Recalls

---

NHTSA Campaign Number: 84E007000
Manufacturer: MCGRAW
Manufactured Begin Date: October 1st, 1983
Manufactured End Date: March 1st, 1984
Date of Owner Notification: March 20th, 1984

Defect Summary:
BRAKE HUB ROTORS WERE NOT MANUFACTURED TO THE PROPER SPECIFICATIONS, CAUSING MISALIGNMENT AND EVENTUAL FAILURE OF THE OUTER WHEEL BEARING.

Corrective Summary:
RETURN BRAKE HUB ASSEMBLY AND REPLACE OUTER BEARING RACE.

Recall Notes:
VEHICLE CATEGORY: PASSENGER VEHICLES.SYSTEM: BRAKES; FRONT BRAKE HUB AND ROTOR ASSEMBLY; AFTERMARKET REPLACEMENTCOMPONENTS, WAGNER PART NUMBER BD102133 AND CENTURY PART NUMBER C6066, DATECODED 27483 THROUGH 36583 AND 00284 THROUGH 06884.CONSEQUENCES OF DEFECT: CONTINUED OPERATION WILL RESULT IN SHORTENED BEARINGLIFE WITH SUBSEQUENT FAILURE OR SEIZURE, POTENTIALLY CAUSING LOSS OF CONTROLAND RESULTING IN AN ACCIDENT.NOTE: MISALIGNMENT WILL USUALLY RESULT IN AUDIBLE WARNING OR ROUGHNESS.

---

NHTSA Campaign Number: 81E007000
Manufacturer: MCGRAW
Manufactured Begin Date: February 1st, 1980
Manufactured End Date: March 1st, 1980
Date of Owner Notification: June 29th, 1981

Defect Summary:
THE WRONG SIZE CUP WAS INCLUDED IN THE WHEEL CYLINDER REPAIR KIT. THE OVERSIZED CUP MAY ALLOW A FLUID BYPASS, RESULTING IN A LOSS OF BRAKE FLUID.

Corrective Summary:
DEFECTIVE KITS WILL BE REPLACED WITHOUT CHARGE. THIS INCLUDES EXPENSES, WITHIN REASON, FOR REPLACEMNET OF UNITS ALREADY INSTALLED IN VEHICLES.

Recall Notes:
VEHICLE CATEGORY: PASSENGER VEHICLES MANUFACTURED BY HONDA.SYSTEM: EQUIPMENT; WHEEL CYLINDER REPAIR KIT, PART NO. F-100675, DATE CODED LBOR LC.CONSEQUENCES OF DEFECT: THIS LOSS OF BRAKE FLUID MAY LEAD TO A FAILURE OF HALFOF THE BRAKING SYSTEM. AN ACCIDENT COULD RESULT, PARTICULARLY IN SITUATIONSWHERE MINIMUM STOPPING DISTANCE IS REQUIRED.

---

NHTSA Campaign Number: 79E023000
Manufacturer: MCGRAW
Manufactured Begin Date: May 1st, 1978
Manufactured End Date: June 1st, 1979
Date of Owner Notification: October 24th, 1979

Defect Summary:
THE LOCK WIRE GROOVE IN THE BRAKE MASTER CYLINDER WAS IMPROPERLY MACHINED. THIS COULD LEAD TO BRAKE FAILURE.

Corrective Summary:
DEALER WILL REPLACE EXISTING VERTICAL BRAKE MASTER ASSEMBLY. THE LOCK WIRES IN THE ASSEMBLY WILL BE REPLACED BY TRU-ARC RINGS.

Recall Notes:
VEHICLE CATEGORY: TRUCKS, TILT CAB.SYSTEM: SERVICE BRAKES; VERTICAL BRAKE MASTER ASSEMBLY, MODEL NO. F-76151.CONSEQUENCES OF DEFECT: BRAKE FAILURE COULD RESULT IN LOSS OF VEHICLE CONTROLAND AN ACCIDENT.