1996 Volvo Volvo Truck Recalls

---

NHTSA Campaign Number: 99V187001
Manufacturer: VOLVO TRUCKS NORTH AMERICA
Manufactured Begin Date: March 27th, 1996
Manufactured End Date: April 14th, 1997

Defect Summary:
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CATERPILLAR 3116 MECHANICALLY UNIT INJECTED DIESEL ENGINES. THE GOVERNOR OF THE ENGINE CONTROLS THE UNIT INJECTOR FUELING BY WAY OF A CONTROL ASSEMBLY. IN THIS ASSEMBLY, A LINK TO THE GOVERNOR IS JOINED TO THE CONTROL ROD USING A RIVET. THIS RIVET CAN LOOSEN AND THEN WEAR RESULTING IN ENGINE SPEED INSTABILITY.

Consequence Summary:
IF NOT IDENTIFIED AND CORRECTED, ENGINE SPEED CONTROL COULD BE LOST DUE TO RIVET DISENGAGEMENT.

Corrective Summary:
CATERPILLAR IS CONDUCTING THE NOTIFICATION AND REMEDY FOR THIS RECALL. DEALERS WILL INSPECT THE CONTROL ASSEMBLY AND REPLACED IF NECESSARY.

Recall Notes:
OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING JULY 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CATERPILLAR AT 1-309-675-5658. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

---

NHTSA Campaign Number: 99V078000
Manufacturer: VOLVO TRUCKS NORTH AMERICA
Manufacturer Campaign Number: RVXA9902
Manufactured Begin Date: March 18th, 1994
Manufactured End Date: December 10th, 1998
Date of Owner Notification: April 23rd, 1999

Defect Summary:
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS ASSEMBLED BY EITHER VOLVO GM HEAVY TRUCK CORPORATION OR VOLVO TRUCKS NORTH AMERICA, INC., AND WITH A 2,100 RPM DETROIT SERIES 60 ENGINE, AND A 32 INCH, 8 BLADE KYSOR ENGINE COOLING FAN. THE BLADES MAY SEPARATE FROM THE ENGINE COOLING FAN ASSEMBLY DURING FAN OPERATION AND FULL ENGINE RPM.

Consequence Summary:
THIS CONDITION POSES A HAZARD TO ANYONE WORKING OR STANDING IN THE AREA OF THE ENGINE COOLING FAN WITHOUT WARNING WHEN THE HOOD IS OPEN.

Corrective Summary:
DEALERS WILL REPLACE THE FACTORY INSTALLED ENGINE COOLING FAN.

Recall Notes:
OWNER NOTIFICATION BEGAN APRIL 23, 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT VOLVO TRUCKS AT 1-800-528-6586. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).

---

NHTSA Campaign Number: 96V124001
Manufacturer: VOLVO TRUCKS NORTH AMERICA
Manufactured Begin Date: July 24th, 1995
Manufactured End Date: February 26th, 1996

Defect Summary:
THE EQUALIZING BEAM SHAFT OF THE TANDEM AXLE SUSPENSION WERE MANUFACTURED FROM AS-ROLLED SAE4140 STEEL RATHER THAN THE SPECIFIED ANNEALED SAE4140. THESE SHAFTS CAN FRACTURE INSIDE THE BEAM AT THE TOE OF THE WELD.

Consequence Summary:
VEHICLES ARE SUBJECT TO VEHICLE TILT AND POSSIBLE ROLLOVER IN THE EVENT THAT BOTH EQUALIZING BEAMS, ON THE SAME SIDE OF THE VEHICLE, EXPERIENCE A SIMULTANEOUS SHAFT FAILURE. AFFECTED SUSPENSIONS CAN ALSO DROP AND CONTACT THE ROAD SURFACE GENERATING SPARKS WHICH COULD IGNITE FLAMMABLE MATERIAL.

Corrective Summary:
OWNER NOTIFICATION IS BEING CONDUCTED BY NEWAY ANCHORLOK. DEALERS WILL INSPECT AND REPLACE ALL SUSPENSION SUSPENSION BEAMS WITH SUSPENSION BEAMS CONTAINING APPROPRIATE SHAFTS.

Recall Notes:
OWNER NOTIFICATION:OWNER NOTIFICATION IS BEING CONDUCTED BY NEWAY ANCHORLOK AND BEGAN JULY 18, 1996.NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDYWITHIN A REASONABLE TIME SHOULD CONTACT NEWAY AT 1-800-237-8932.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.