2009 Terex Digger Derrick Recalls

All 2009 Terex Digger Derrick recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.

March 13th, 2013

NHTSA Campaign Number: 13V089000
Manufacturer: TEREX SOUTH DAKOTA, INC.
Manufacturer Campaign Number: SN602
Date of Owner Notification: May 23rd, 2013

Defect Summary:
Terex South Dakota, Inc. (Terex) is recalling certain model year 1999-2012 XL4000 Digger Derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.

Consequence Summary:
The hydraulic cylinder may separate from the digger derick arm, allowing it to collapse without warning, increasing the risk of injury to the operator or those nearby.

Corrective Summary:
Terex will notify owners, and dealers will inspect and replace the rod eye and threads, as necessary. The existing shims and spacer will be replaced with a hardened spacer. All repairs will be made at no charge to the owner. The recall began on May 23, 2013. Owners may contact Terex at 1-605-882-4000.

Recall Notes:
Terex's recall campaign number is SN602.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

March 13th, 2013

NHTSA Campaign Number: 13V089000
Manufacturer: TEREX SOUTH DAKOTA, INC.
Manufacturer Campaign Number: SN602
Date of Owner Notification: May 23rd, 2013

Defect Summary:
Terex South Dakota, Inc. (Terex) is recalling certain model year 1999-2012 XL4000 Digger Derrick utility trucks. The shims and spacers used to adjust the length of the hydraulic cylinder may give, causing the rod eye and threads to fatigue while lifting loads.

Consequence Summary:
The hydraulic cylinder may separate from the digger derick arm, allowing it to collapse without warning, increasing the risk of injury to the operator or those nearby.

Corrective Summary:
Terex will notify owners, and dealers will inspect and replace the rod eye and threads, as necessary. The existing shims and spacer will be replaced with a hardened spacer. All repairs will be made at no charge to the owner. The recall began on May 23, 2013. Owners may contact Terex at 1-605-882-4000.

Recall Notes:
Terex's recall campaign number is SN602.Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

February 1st, 2011

NHTSA Campaign Number: 11V048000
Manufacturer: TEREX SOUTH DAKOTA, INC.
Manufacturer Campaign Number: CB593
Manufactured Begin Date: June 1st, 2008
Manufactured End Date: November 30th, 2010
Date of Owner Notification: February 11th, 2011

Defect Summary:
TEREX IS RECALLING CERTAIN MODEL YEAR 2008-2010 AERIAL DEVICE AND DIGGER DERRICK UTILITY VEHICLES MANUFACTURED FROM JUNE, 2008 THROUGH NOVEMBER, 2010. THE LANYARD ANCHORS WERE NOT HEAT TREATED PROPERLY AND MAY FRACTURE.

Consequence Summary:
FAILURE OF THE LANYARD ANCHOR COULD OCCUR INCREASING THE RISK OF PERSONAL INJURIES OR DEATH.

Corrective Summary:
DEALERS WILL REPLACE THE LANYARD ANCHORS WITH A NEW PART FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 11, 2011. OWNERS MAY CONTACT TEREX AT 1-605-884-3892.

Recall Notes:
TEREX SAFETY RECALL NO. CB593.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .

Recall Comments

No comments have been posted.
Be the first to add a comment!