1986 John Deere Rv1000 Recalls

---

NHTSA Campaign Number: 90V003000
Manufacturer: JOHN DEERE
Manufactured Begin Date: April 1st, 1986
Manufactured End Date: October 1st, 1987
Date of Owner Notification: May 1st, 1990

Defect Summary:
THE PARKING BRAKE RELEASE CABLE MAY BIND IF IT IS TOO CLOSE TO THE EXHAUST MANIFOLD. ALSO, THE OIL HOSE MAY CONTACT THE BRAKE PUMP BRACKET AND EVENTUALLY CAUSE OIL TO LEAK FROM THE HYDRO-MAX SYSTEM.

Consequence Summary:
THIS COULD CAUSE THE PARKING BRAKE TO BE INOPERATIVE, WHICH COULD ALLOW THE TRUCK TO ROLL AND COULD RESULT IN AN ACCIDENT.

Corrective Summary:
REPLACE AND REROUTE CABLE TO PREVENT BINDING. ALSO INSPECT AND REPLACE DAMAGED HOSE.

Recall Notes:
SYSTEM: PARKING BRAKE RELEASE CABLE.VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS.

---

NHTSA Campaign Number: 87V163000
Manufacturer: JOHN DEERE
Manufactured Begin Date: April 1st, 1986
Manufactured End Date: September 1st, 1987
Date of Owner Notification: January 1st, 1988

Defect Summary:
A SHIELD AND SUPPORT LOCATED UNDER OPERATORS PLATFORM MAY CONTACT LEFT FRONT TIRE DURING TIGHT RIGHTHAND TURNS.

Consequence Summary:
IF OPERATED IN REVERSE WITH WHEEL TURNED TIGHTLY RIGHT,THE TIP OF METAL SUPPORT MAY DAMAGE INSIDE SIDE WALL OF LEFT FRONT TIRE.

Corrective Summary:
REMOVE INTERFERING SUPPROT AND INSTALL NEW SUPPORT THAT CANNOT CONTACT THE TIRE.

Recall Notes:
SYSTEM: STRUCTUREVEHICLE DESCRIPTION: CHASSIS FOR MOTOR HOME.

---

NHTSA Campaign Number: 87V033000
Manufacturer: JOHN DEERE
Manufactured Begin Date: April 1st, 1986
Manufactured End Date: February 1st, 1987
Date of Owner Notification: May 15th, 1987

Defect Summary:
THE THREADS IN SOME FUEL FILLER NECK INSERTS ARE NOT PROPERLY FORMED.

Consequence Summary:
FUEL FILLER CAPS CAN BIND AND RATCHET BEFORE SEALING.

Corrective Summary:
INSTALL REPLACEMENT FUEL FILLER NECK.

Recall Notes:
SYSTEM: FUELVEHICLE DESCRIPTION: VEHICLE CHASSIS GVWR 15,440, 15,600, 16,000 AND 18,000LBS.