1995 Gmc C7 Recalls

---

NHTSA Campaign Number: 95V130000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: November 1st, 1994
Manufactured End Date: April 1st, 1995
Date of Owner Notification: July 13th, 1995

Defect Summary:
THESE VEHICLES WERE ASSEMBLED WITH A TRANSMISSION REVERSE SIGNAL SWITCH THAT COULD LEAK CAUSING LOSS OF ELECTRICAL CONTACT WHEN THE TRANSMISSION IS IN REVERSE. THIS DOES NOT MEET THE REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Consequence Summary:
CONSEQUENCE OF NON-COMPLIANCE: THIS CONDITION CAN PREVENT THE BACKUP WARNING SYSTEM (LIGHTS AND AUDIBLE ALARMS) FROM OPERATING PROPERLY, INCREASING THE POTENTIAL FOR AN ACCIDENT.

Corrective Summary:
DEALERS WILL REPLACE THE REVERSE SIGNAL PRESSURE SWITCH.

Recall Notes:
SYSTEM: LIGHTING AND COMMUNICATIONS; BACK UP LIGHTS; AUDIBLE ALARM; FMVSS 108.VEHICLE DESCRIPTION: MEDIUM DUTY CONVENTIONAL TRUCKS AND CHASSIS EQUIPPED WITH ALLISON AT/MT SERIES AUTOMATIC TRANSMISSIONS (OPTION RPO'S MF1, MT9, ME3, ME4, ME5 AND ME6). NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-800-462-8782.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

---

NHTSA Campaign Number: 95V027000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: July 1st, 1994
Manufactured End Date: October 1st, 1994
Date of Owner Notification: February 22nd, 1995

Defect Summary:
THE SEATS OF THESE VEHICLES CAN HAVE INCOMPLETE WELDED LEFT SIDE SEAT BACK FRAME EXTENDER ARM WELDS. VEHICLES WITH AFFECTED SEATS DO NOT COMPLY WITH FMVSS NO. 207, "SEATING SYSTEMS."

Consequence Summary:
COSEQUENCE OF NON-COMPLIANCE: THIS CONDITION CAN CAUSE THE SEAT TO COLLAPSE DURING A VEHICLE ACCIDENT AND WOULD NOT PROPERLY PROTECT THE OCCUPANT.

Corrective Summary:
DEALERS WILL INSPECT THE LEFT SIDE SEAT BACK EXTENDER ARMS OF THE SEATS FOR MISSING WELDS. WELDS SHOULD BE ON BOTH SIDES OF THE SEAT BACK EXTENDER ARM. IF A WELD IS MISSING, THE AFFECTED SEAT BACK FRAME ASSEMBLY(IES) WILL BE REPLACED.

Recall Notes:
SYSTEM: INTERIOR; SEATS; BUCKET.VEHICLE DESCRIPTION: MEDIUM DUTY PICKUP TRUCKS EQUIPPED WITH NATIONAL SEATING COMPANY AIR SUSPENSION DRIVER AND PASSENGER LOW AND HIGH BACK BUCKET SEATS. NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME, CONTACT CHEVROLET AT 1-800-222-1020 OR GMC AT 1-810-456-4547. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.