1988 Ford Festiva Recalls

---

NHTSA Campaign Number: 96E017000
Manufacturer: FORD MOTOR COMPANY
Manufactured Begin Date: April 1st, 1996
Manufactured End Date: June 1st, 1996
Date of Owner Notification: July 17th, 1996

Defect Summary:
EQUIPMENT DESCRIPTION: AFTERMARKET BALL JOINT/CONTROL ARM MANUFACTURED BY MOOG INDUSTRIES. DUE TO MISPACKAGING, CERTAIN BALL JOINT/CONTROL ARM ASSEMBLIES WERE INCORRECTLY PLACED IN THE WRONG BOXES.

Consequence Summary:
THESE BALL JOINT/CONTROL ARM ASSEMBLIES WILL NOT FIT INTO THE FRAME RECESS WITHOUT BEING ALTERED. ALSO THE STUD IS UNDERSIZED AND WILL NOT FIT THE SPINDLE PROPERLY POSSIBLY CAUSING A LOSS OF STEERING CONTROL INCREASING THE RISK OF A VEHICLE ACCIDENT.

Corrective Summary:
MOOG WILL REPLACE THE INCORRECTLY PACKAGED ASSEMBLIES WITH CORRECT BALL JOINT/CONTROL ARM ASSEMBLIES.

Recall Notes:
SYSTEM: SUSPENSION; INDEPENDENT FRONT CONTROL ARM; UPPER; BALL JOINT. EQUIPMENT DESCRIPTION: AFTERMARKET BALL JOINT/CONTROL ARM ASSEMBLIES FOR USE ON 1988 THROUGH 1993 FORD FESTIVA MODEL VEHICLES. OWNER NOTIFICATION: DISTRIBUTORS/DEALERS HAVE ALREADY BEEN NOTIFIED OF THE PROBLEM AND CUSTOMERS WILL BE NOTIFIED SHORTLY.NOTE: OWNERS WHO DO NOT RECEIVE THE CORRECT ASSEMBLIES FREE OF CHARGE WITHIN A REASONABLE TIME SHOULD CONTACT MOOG AT 1-314-385-3400. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.

---

NHTSA Campaign Number: 95V103011
Manufacturer: FORD MOTOR COMPANY
Manufactured Begin Date: September 1st, 1987
Manufactured End Date: July 1st, 1991
Date of Owner Notification: April 24th, 1996

Defect Summary:
THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Consequence Summary:
THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.

Corrective Summary:
OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THAT LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.

Recall Notes:
SYSTEM: INTERIOR; SEAT BELTS; BELT BUCKLES.VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH SAFETY BELTS MADE BY TAKATA CORPORATION.NOTE: THE 1987 THROUGH 1989 4-DOOR MERCURY TRACERS INVOLVED IN THIS RECALLCAMPAIGN WERE ONLY SOLD IN CANADA. NO TRACERS SOLD IN THE UNITED STATES ARE INVOLVED.NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT FORD AT 1-800-392-3673. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.