1981 Ford F880 Recalls

---

NHTSA Campaign Number: 82V119000
Manufacturer: FORD MOTOR COMPANY
Manufactured Begin Date: August 1st, 1981
Manufactured End Date: November 1st, 1982
Date of Owner Notification: January 3rd, 1983

Defect Summary:
THESE VEHICLES MAY HAVE BEEN MANUFACTURED WITH AN INCORRECT END CLAMP ON THE HAND THROTTLE ACTUATING CABLE. UNDER CERTAIN CONDITIONS, PERTAINING TO THE CLAMP-TO-THROTTLE CABLE ORIENTATION AND DISTANCES OF THE CABLE TO GOVERNOR SHAFT, THE THROTTLE CABLE END CLAMP MAY INTERFERE WITH THE OUTBOARD ACCELERATOR.

Corrective Summary:
THE DEALER WILL INSPECT HAND THROTTLE CLAMP FOR INTERFERENCE AND, IF NECESSARY, REPLACE THESE CLAMPS FREE OF CHARGE.

Recall Notes:
VEHICLE DESCRIPTION: TRUCKS AND BUSES EQUIPPED WITH 8.2 LITER DIESEL ENGINESAND OPTIONAL HAND THROTTLE CONTROLS.SYSTEM: FUEL; HAND THROTTLE.CONSEQUENCES OF DEFECT: IF SUCH INTERFERENCE OCCURS, THE THROTTLE MAY NOTRETURN TO THE IDLE POSITION UPON RELEASE OF THE ACCELERATOR PEDAL, POSSIBLYCAUSING LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

---

NHTSA Campaign Number: 82V120000
Manufacturer: FORD MOTOR COMPANY
Manufactured Begin Date: August 1st, 1979
Manufactured End Date: April 1st, 1981
Date of Owner Notification: January 24th, 1983

Defect Summary:
THE BRAKE MASTER CYLINDER TO CHASSIS TUBE AND HOSE ASSEMBLY MAY HAVE BEEN LOCATED IN SUCH A WAY THAT IT IS SUSCEPTIBLE TO CHAFING DURING VEHICLE OPERATION. CONTINUED CHAFING MAY RESULT IN TUBE OR HOSE FAILURE AND SUBSEQUENT LOSS OF BRAKE FLUID.

Corrective Summary:
THE DEALER WILL INSPECT AND, IF NECESSARY, INSTALL A BRAKE LINE ATTACHING CLIP AND REPLACE ANY DAMAGED BRAKE TUBE AND HOSE ASSEMBLY WITHOUT CHARGE.

Recall Notes:
VEHICLE DESCRIPTION: HEAVY TRUCKS EQUIPPED WITH HYDRAULIC BRAKES.SYSTEM: SERVICE BRAKES; HYDRAULIC BRAKE TUBE AND HOSE ASSEMBLY.CONSEQUENCES OF DEFECT: LOSS OF BRAKE FLUID WOULD LEAD TO A REDUCTION IN ORLOSS OF SERVICE BRAKING CAPABILITY WHICH COULD CAUSE LOSS OF VEHICLE CONTROLAND AN ACCIDENT.NOTE: VEHICLE OPERATOR MAY BE ALERTED TO THE PROBLEM BY A DROP IN BRAKE PEDALHEIGHT DURING APPLICATION. ILLUMINATION OF BRAKE WARNING LIGHT ON THEINSTRUMENT PANEL MAY ALSO ALERT DRIVER TO THE SITUATION.