1967 Ford F600 Recalls

---

NHTSA Campaign Number: 67V047001
Manufacturer: FORD MOTOR COMPANY

Recall Notes:
POSSIBLE BRITTLE NUTS USED TO ATTACH FRONT AND REAR SPRING U-BOLTS, REAR SHACKLE, AND FRONT BRAKE BACKING PLATE.THESE NUTS COULD CRACK OR SPLIT AND FALL OFF.(REPLACE THE SUBJECT NUTS.)

---

NHTSA Campaign Number: 67V053000
Manufacturer: FORD MOTOR COMPANY
Date of Owner Notification: June 15th, 1967

Recall Notes:
POSSIBILITY THAT STEERING COMPONENTS MAY BE SUBJECT TO POSSIBLE DAMAGE UNDER POOR ROAD CONDITIONS WITH SEVERE CHUCKHOLES AND ESPECIALLY AT HIGH MILEAGES.THE FIRST INDICATION OF ANY PROBLEM WOULD BE MARKED INCREASE IN STEERING EFFORTS WHICH COULD INCREASE THE POSSIBILITY OF FAILURE TO CRITICAL STEERING COMPONENTS.(INSPECT AND REPLACE STEERING COMPONENTS WITH NEW DESIGN.)

---

NHTSA Campaign Number: 68V028000
Manufacturer: FORD MOTOR COMPANY
Manufactured Begin Date: January 1st, 1967
Manufactured End Date: February 1st, 1968
Date of Owner Notification: March 28th, 1968

Recall Notes:
POSSIBILITY FAILURE OF RIVETS USED FOR ATTACHING THE FRONT SPRING REAR HANGER BRACKET TO THE FRAME.RIVET FAILURE WOULD ALLOW THE BRACKET TO SEPARATE FROM THE FRAME IMPOSING SEVERE LOADS AT THE FRONT BRACKET.SHOULD THE SPRING DISENGAGE FROM THE FRONT BRACKET THE AXLE WILL SHIFT AND LOSS OF STEERING CONTROL COULD RESULT.ALSO, THERE IS A POS- SIBILITY OF MISASSEMBLY OR MIS-ALIGNMENT OF CERTAIN COMPONENTS IN THE POWER STEERING SYSTEM.FAILURE TO CORRECT THIS CONDITION, IF PRESENT, ALSO COULD RESULT IN LOSS OF STEERING CONTROL.(CORRECT BY IN- STALLING NEW RIVETS AND POWER STEERING COMPONENTS IF NECESSARY.)