1989 Coachmen Cross Country Recalls

All 1989 Coachmen Cross Country recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.

April 28th, 1993
Recalled Component
VISIBILITY:WINDSHIELD WIPER/WASHER:SWITCH/WIRING
Recall Date
April 28th, 1993
Units Effected
571
NHTSA Campaign Number: 93V059000
Manufacturer: HIGH COUNTRY ALUMINUM PRODUCTS. LLC
Manufactured Begin Date: August 1st, 1988
Manufactured End Date: April 1st, 1990
Date of Owner Notification: July 16th, 1993

Defect Summary:
THE WINDSHIELD WIPER/WASHER SWITCH ON THE DASH IS NOT ILLUMINATED, AND DOES NOT COMPLY WITH FMVSS 101, "CONTROLS AND DISPLAYS."

Consequence Summary:
DURING NIGHT OPERATION, THE LACK OF A LIGHT MAY DIVERTTHE ATTENTION OF THE DRIVER, THEREBY CONTRIBUTING TO AN ACCIDENT.

Corrective Summary:
INSTALL A LIGHT OVER THE WIPER/WASHER CONTROL SWITCH.

Recall Notes:
SYSTEM: VISUAL SYSTEMS; WINDSHIELD WIPERS; FMVSS 101.VEHICLE DESCRIPTION: MOTORHOMES BUILT ON GENERAL MOTORS CORPORATION P-30CHASSIS.

April 28th, 1993
Recalled Component
SEAT BELTS:FRONT:ANCHORAGE
Recall Date
April 28th, 1993
Units Effected
571
NHTSA Campaign Number: 93V060000
Manufacturer: HIGH COUNTRY ALUMINUM PRODUCTS. LLC
Manufactured Begin Date: August 1st, 1988
Manufactured End Date: April 1st, 1990
Date of Owner Notification: July 16th, 1993

Defect Summary:
AN INCORRECT DIAMETER WASHER MAY HAVE BEEN INSTALLED ON SOME SAFETY BELT ASSEMBLY FLOOR ANCHORAGES. THIS DOES NOT COMPLY WITH FMVSS 210, "SEAT BELT ASSEMBLY ANCHORAGES."

Consequence Summary:
WASHERS OF AN INCORRECT DIAMETER MAY NOT BE ABLE TOWITHSTAND THE FORCES OF A SUDDEN STOP OR ACCIDENT, PULLING OUT OF THE FLOOR,AND SUBJECTING SEAT OCCUPANTS TO INCREASED RISK OF INJURY.

Corrective Summary:
INSTALL CORRECT DIAMETER (2.25 INCH) WASHERS.

Recall Notes:
SYSTEM: SAFETY BELT ASSEMBLY ANCHORAGE; FMVSS 210.VEHICLE DESCRIPTION: MOTORHOMES.

April 28th, 1993
Recalled Component
SEAT BELTS:FRONT:ANCHORAGE
Recall Date
April 28th, 1993
Units Effected
571
NHTSA Campaign Number: 93V061000
Manufacturer: HIGH COUNTRY ALUMINUM PRODUCTS. LLC
Manufactured Begin Date: August 1st, 1988
Manufactured End Date: April 1st, 1990
Date of Owner Notification: July 16th, 1993

Defect Summary:
SAFETY BELTS MAY BE INCORRECTLY ROUTED BECAUSE A PASSAGE HOLE THROUGH THE SEAT WAS NOT PROVIDED, AND THERE MAY BE EXCESSIVE SLACK IN THE SAFETY BELT, WHICH DOES NOT COMPLY WITH FMVSS 209, "SAFETY BELT ASSEMBLIES."

Consequence Summary:
EXCESSIVE SLACK IN THE SAFETY BELT INCREASES THE RISK OFINJURY TO SEAT OCCUPANT IN THE EVENT OF A SUDDEN STOP OR ACCIDENT.

Corrective Summary:
REROUTE THE SAFETY BELT TO REDUCE THE AMOUNT OF SLACK.

Recall Notes:
SYSTEM: SAFETY BELT ASSEMBLIES; FMVSS 209.VEHICLE DESCRIPTION: MOTORHOMES.

Recall Comments

Leave a Comment
No comments have been posted.
Be the first to add a comment!