1979 Buick Regal Recalls

---

NHTSA Campaign Number: 07E088000
Manufacturer: GENERAL MOTORS LLC
Date of Owner Notification: November 8th, 2007

Defect Summary:
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

Consequence Summary:
THIS CONDITION MAY CAUSE INADEQUATE SEALING AND LOSS OF ENGINE OIL, POSSIBLY RESULTING IN A FIRE.

Corrective Summary:
HONEYWELL WILL REPLACE THE AFFECTED OIL FILTERS FREE OF CHARGE. THE RECALL BEGAN DURING NOVEMBER 2007. OWNERS CAN CONTACT FRAM CUSTOMER SERVICE TOLL-FREE AT 1-800-890-2075.

Recall Notes:
CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.

---

NHTSA Campaign Number: 84V149000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: August 1st, 1977
Manufactured End Date: July 1st, 1980
Date of Owner Notification: December 28th, 1984

Defect Summary:
REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.

Corrective Summary:
THE DEALER WILL INSPECT THE REAR AXLE TO DETERMINE WHETHER IT WAS MANUFACTURED AT THE BUFFALO PLANT. IF SO, THEY WILL MAKE AXLE MEASUREMENTS AND IF NECESSARY REPLACE OR MODIFY AFFECTED AXLE COMPONENTS WITHOUT CHARGE.

Recall Notes:
VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.SYSTEM: POWER TRAIN; REAR AXLE.CONSEQUENCES OF DEFECT: LOSS OF THE WHEEL ASSEMBLY COULD LEAD TO LOSS OFVEHICLE CONTROL AND AN ACCIDENT.

---

NHTSA Campaign Number: 81V025000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: August 1st, 1977
Manufactured End Date: December 1st, 1980
Date of Owner Notification: March 9th, 1981

Defect Summary:
THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.

Corrective Summary:
BOTH REAR CONTROL ARM ATTACHMENT BOLTS WILL BE REPLACED WITHOUT CHARGE.

Recall Notes:
SYSTEM: SUSPENSION; REAR CONTROL ARM ATTACHING BOLTS.VEHICLE DESCRIPTION: PASSENGER VEHICLES AND LIGHT TRUCKS.CONSEQUENCES OF DEFECT: IF THE FRACTURE OCCURS WHEN THE VEHICLE IS IN MOTION,IT COULD RESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.

---

NHTSA Campaign Number: 79V214000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: June 1st, 1979
Manufactured End Date: June 1st, 1979
Date of Owner Notification: September 21st, 1979

Defect Summary:
THE SHIFT CABLE RETAINING CLIP MAY HAVE BEEN INSTALLED BACKWARDS OR NOT AT ALL. THE PURPOSE OF THIS SPRING CLIP IS TO SECURE THE LOWER END OF THE SHIFT CABLE HOUSING TO THE TRANSMISSION. IF THE CLIP IS BACKWARD OR MISSING, THE CONSOLE SHIFT LEVER MAY NOT SHIFT THE TRANSMISSION AND/OR THE TRANSMISSION RANGE INDICATOR MAY INDICATE THAT THE TRANSMISSION IS IN THE "PARK" OR "P" POSITION WHEN IT IS NOT.

Corrective Summary:
THE DEALER WILL INSPECT AND IF NECESSARY CORRECT THE SHIFT CABLE RETAINING CLIP INSTALLATION AT NO CHARGE.

Recall Notes:
VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: POWER TRAIN; TRANSMISSION SHIFT CABLE.CONSEQUENCES OF DEFECT: IF THE VEHICLE OPERATOR LEAVES HIS/HER VEHICLE WITHOUTENGAGING THE EMERGENCY BRAKE AND BELIEVING THAT THE TRANSMISSION IS IN PARK,THE VEHICLE MAY ROLL AND HIT OTHER VEHICLES OR PERSONS IN ITS PATH CAUSINGSERIOUS PERSONAL INJURY.

---

NHTSA Campaign Number: 79V142000
Manufacturer: GENERAL MOTORS LLC
Manufactured Begin Date: December 1st, 1978
Manufactured End Date: January 1st, 1979

Defect Summary:
ON THE INVOLVED VEHICLES THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH WHICH IS OPERATED BY THE BRAKE PEDAL MAY HAVE BEEN ASSEMBLED WITH AN INCORRECT LUBRICANT ON THE ACTUATING PLUNGER. THIS CAN CAUSE THE REAR BRAKE STOPLIGHTS TO BECOME INOPERATIVE AND THE CRUISE CONTROL, IF ACTIVATED, TO STAY ELECTRICALLY ENGAGED.

Corrective Summary:
DEALER WILL INSPECT AND, IF NECESSARY, REPLACE THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH AT NO COST TO OWNER.

Recall Notes:
VEHICLE DESCRIPTION: PASSENGER VEHICLES.SYSTEM: LIGHTING AND COMMUNICATIONS; SWITCH BUTTON RING, BRAKE LIGHTS.CONSEQUENCES OF DEFECT: WITH INOPERATIVE BRAKE LIGHTS, A VEHICLE APPROACHINGFROM THE REAR WOULD NOT BE AWARE THAT BRAKES WERE BEING APPLIED. ALSO, IF THECRUISE CONTROL FAILS TO AUTOMATICALLY DISENGAGE THROUGH BRAKE PEDAL OPERATION,VEHICLE MAY ACCELERATE WHEN THE BRAKE PEDAL IS RELEASED. EITHER CONDITION COULDRESULT IN LOSS OF VEHICLE CONTROL AND AN ACCIDENT.NOTE: OWNER IS ADVISED NOT TO ENGAGE THE CRUISE CONTROL UNTIL IT HAS BEENINSPECTED BY DEALER.