1967 American Motors Rebel Recalls

---

NHTSA Campaign Number: 67V049000
Manufacturer: Chrysler (FCA US LLC)
Date of Owner Notification: May 9th, 1967

Recall Notes:
POSSIBILITY THAT THE STEERING SHAFT WAS IMPROPERLY INSTALLED.THIS COULD CAUSE A BINDING CONDITION WHICH, EVEN THOUGH NOT NOTICEABLE TO THE DRIVER, MIGHT SUBJECT THE STEERING SHAFT TO ABNORMAL STRESSES UNDER CERTAIN CONDITIONS.THESE STRESSES MAY CAUSE THE STEERING SHAFT TO BREAK WITH RESULTANT LOSS OF STEERING.(INSPECT AND REPLACE STEERING SHAFT WITH IMPROVED DESIGN.)

---

NHTSA Campaign Number: 67V032000
Manufacturer: Chrysler (FCA US LLC)
Date of Owner Notification: March 17th, 1967

Recall Notes:
POSSIBILITY THAT A MALADJUSTED CRUISE COMMAND BELLOWS CHAIN CAN INTERFERE WITH THE LEVER OF THE CARBURETOR CONTROL SHAFT ROD AND HOLD THE THROTTLE IN A PARTIALLY OPEN POSITION.(INSTALL CRUISE COMMAND CHAIN SHIELD SPRING.)

---

NHTSA Campaign Number: 67V008000
Manufacturer: Chrysler (FCA US LLC)
Date of Owner Notification: January 16th, 1967

Recall Notes:
POSSIBLE INTERFERENCE BETWEEN THE STEERING GEAR AND THE STEERING GEAR SIDE SILL ADAPTOR.THIS INTERFERENCE COULD CAUSE EXCESSIVE STRESS ON EACH OF THE STEERING GEAR BOX MOUNTING BOSSES WHEN THE GEAR BOX MOUNTING BOLTS ARE PROPERLY TORQUED.(REPLACE STEERING GEAR TO SILL ADAPTOR.)

---

NHTSA Campaign Number: 66V010000
Manufacturer: Chrysler (FCA US LLC)
Date of Owner Notification: September 15th, 1966

Recall Notes:
THE BALL CHAIN MAY CATCH ACCIDENTALLY BENEATH THE ACCELERATOR CONTROL ROD BRACKET AND HOLD THE THROTTLE ROUGHLY THREE-QUARTERS OPEN.(REPLACE WITH REVISED ACCELERATOR CONTROL ROD AND BRACKET AND NEW BALL LINK CHAIN.)