2014 Altec Aerial Device Recalls

All 2014 Altec Aerial Device recalls can be found below. It is important to us to provide a complete resource for recall information, so if you know of any additional related recalls, please contact us to let us know.

July 28th, 2015

NHTSA Campaign Number: 15V473000
Manufacturer: ALTEC INDUSTRIES INC.
Manufacturer Campaign Number: CSN 625
Manufactured Begin Date: June 1st, 2006
Manufactured End Date: April 1st, 2015
Date of Owner Notification: September 4th, 2015

Defect Summary:
Altec Industries Inc. (Altec) is recalling certain model year 2006-2015 Aerial Devices manufactured from June 1, 2006, through April 1, 2015. The affected aerial devices outrigger interlock control system may not detect proper deployment of the outriggers, allowing for instability of the boom.

Consequence Summary:
If the aerial device is operated while the outrigger is not properly deployed it can cause instability of the boom, increasing the risk of person injury or death.

Corrective Summary:
Altec will notify owners, and dealers will replace the aerial device with a new outrigger interlock module, free of charge. The recall began on September 4, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 625.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

March 16th, 2015

NHTSA Campaign Number: 15V150000
Manufacturer: ALTEC INDUSTRIES INC.
Manufacturer Campaign Number: CSN 614
Manufactured Begin Date: April 1st, 2014
Manufactured End Date: July 18th, 2014
Date of Owner Notification: May 12th, 2015

Defect Summary:
Altec Industries Inc. (Altec) is recalling certain model year 2014 Aerial Devices manufactured April 1, 2014, to July 18, 2014, and equipped with certain SUN Hydraulics Corporation counterbalance valves. In the affected vehicles, the counterbalance valve may crack, allowing hydraulic fluid to leak, and possibly result in boom movement.

Consequence Summary:
Unintended boom movement of the aerial device increases the operator's risk of injury.

Corrective Summary:
Altec will notify owners, and dealers will replace the counterbalance valves, free of charge. The recall began on May 12, 2015. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN 614.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

February 23rd, 2015

NHTSA Campaign Number: 15V101000
Manufacturer: ALTEC INDUSTRIES INC.
Manufacturer Campaign Number: CSN 612
Manufactured Begin Date: October 1st, 2012
Manufactured End Date: June 30th, 2014
Date of Owner Notification: April 17th, 2015

Defect Summary:
Altec Industries Inc. (Altec) is recalling certain model year 2012-2014 Digger Derrick and Aerial Device vehicles manufactured October 1, 2012, to June 30, 2014, and mounted on Freightliner chassis. In the event of a short circuit condition, the 30 amp breaker to the trailer relay module may react too slowly to prevent the module from overheating.

Consequence Summary:
If the module overheats, there is an increased risk of a fire.

Corrective Summary:
Altec will notify owners, and dealers will replace the 30 amp circuit breaker with a 20 amp one, free of charge. The recall began on April 17, 2015. Owners may contact Altec customer service at 1-800-860-0183. Altec's number for this recall is CSN 612.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

February 19th, 2015

NHTSA Campaign Number: 15V096000
Manufacturer: ALTEC INDUSTRIES INC.
Manufacturer Campaign Number: CSN 611
Manufactured Begin Date: June 1st, 2011
Manufactured End Date: September 30th, 2014
Date of Owner Notification: April 6th, 2015

Defect Summary:
Altec Industries, Inc. (Altec) is recalling certain model year 2011-2014 Aerial Devices, models L36A, LRV, and LR7, manufactured June 1, 2011, to September 30, 2014, and built with Texas Hydraulics upper boom drive cylinders. In the affected aerial devices, the cylinder base end lug casting may develop cracks.

Consequence Summary:
If the cylinder lug castings crack, they may fail, resulting in unintended movement of the boom, increasing the risk of personal injury or death to the aerial device user or those nearby.

Corrective Summary:
Altec will notify owners, and dealers will inspect the cylinders for specific casting suspect lots. If both upper boom drive cylinders are not of the suspect lots, no further action is required. If a cylinder is found to be of one of the suspect lots, it will be inspected for visible cracks. If cracks are found the unit should be removed from service immediately and the cylinder will be replaced. If no cracks are found, the unit will be scheduled for magnetic particle inspection of the cylinder lug within 60 days. All of these actions will be performed free of charge. The recall began on April 6, 2015. Owners may contact Altec customer service at 1-800-860-0183. Altec's number for this recall is CSN 611.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

November 21st, 2014

NHTSA Campaign Number: 14V745000
Manufacturer: ALTEC INDUSTRIES INC.
Manufacturer Campaign Number: CSN 609
Manufactured Begin Date: January 1st, 1999
Manufactured End Date: July 15th, 2014
Date of Owner Notification: January 16th, 2015

Defect Summary:
Altec Industries Inc. (Altec) is recalling certain model year 1999-2014 aerial devices models A65, A70, A75, A72-, A/77-T, A82-T, A72-TE88, and A77-TE93 manufactured January 1, 1999, to July 15, 2014. The affected aerial devices may have an improperly set hydraulic pressure transducer which relieves excessive backpressure in the hydraulic tank circuit.

Consequence Summary:
In cooler temperatures, the improperly set hydraulic pressure transducer may result in inadvertent boom movement, increasing the risk of injury to the occupant or those nearby.

Corrective Summary:
Altec will notify owners, and dealers will replace and install a pressure switch, free of charge. The recall began in January 16, 2015. Owners may contact Altec customer service at 1-205-991-7733. Altec's number for this recall is CSN 609.

Recall Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall Comments

No comments have been posted.
Be the first to add a comment!